Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of PENTAMID AHT2 GV30 H2 black - PA6T/66-GF30 - Pentac Polymer GmbH

Material Data Center offers the following functions for PENTAMID AHT2 GV30 H2 black:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Pentamid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
성형 수축률, 평행 0.2 / * % ISO 294-4, 2577
성형 수축률, 수직 0.8 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 11100 / 10600 MPa ISO 527
파단시 강도 180 / 175 MPa ISO 527
파단시 신율 2 / 2 % ISO 527
챠피 충격 강도, +23°C 60 / 65 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 10 / 11 kJ/m² ISO 179/1eA
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 310 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 270 / * °C ISO 75-1/-2
1.5mm 평균두께에서의 난연성 HB / * class IEC 60695-11-10
테스트 두께 1.6 / * mm -
기타 특성건조/응축단위시험규격
물에서의 흡수성 4.5 / * % ISO 62와 유사
조건에서의 흡습성 1.8 / * % ISO 62와 유사
밀도 1420 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 12 h -
Processing humidity ≤0.05 % -
성형온도 100 - 140 °C -
Feed temperature 80 °C -
Zone 1 310 °C -
Zone 2 310 °C -
Zone 3 315 °C -
Zone 4 320 °C -
Zone 5 310 °C -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이), 검정
특별 특성
열안정성
Certifications
RoHS
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.